[Kartbuilding] Regarding power transmission

[Stephen Burke]

Hi Anbu,

1. Braking System
http://kartbuilding.net/Freeplans/brakeandsprocket.htm
http://kartbuilding.net/racingkart/Free_Racing_Kart_Plans_PDF/Main_Kart_Complete_09_Rear_Brakes.pdf

2. Steering System
http://kartbuilding.net/Freeplans/steering.htm
http://kartbuilding.net/racingkart/Free_Racing_Kart_Plans_PDF/Main_Kart_Complete_12_Front_Steering_End.pdf

3. Suspension System
As of yet, none of the karts I made had suspension.

4. Engine and Transmission
http://kartbuilding.net/drive/drive.htm
http://kartbuilding.net/racingkart/Free_Racing_Kart_Plans_PDF/Main_Kart_Complete_15_Engine_Cradle.pdf
http://kartbuilding.net/racingkart/Free_Racing_Kart_Plans_PDF/Main_Kart_Complete_16_Engine_Cradle_Support.pdf
The simplest setup is to get a motorcycle engine, bolt it into a cradle,
and use a chain to drive a sprocket on the rear axle.

5. Wheels
Whatever wheels you can get. Wheels off a small car/trailer with hubs
would be good.

6. Pedals
http://kartbuilding.net/Freeplans/pedals.htm
or
http://kartbuilding.net/racingkart/Free_Racing_Kart_Plans_PDF/Main_Kart_Complete_18_Pedals.pdf
http://kartbuilding.net/racingkart/Old_Racing_Kart/pedals.htm

Best of luck,
-steve

On 25/01/2013 09:51, Anbu wrote:
> Sir is there any steps in arranging the following in order,
>
> braking system
>
> steering system
>
> suspension system
>
> engine and transmission
>
> wheel
>
> steering system
>
> brake and clutch pedal  ????
>
>
>
> If so please help with me, sir ...
>
>
>
> On Sun, Jan 6, 2013 at 5:47 PM, Stephen Burke wrote:
>
>     Hi Anbu,
>
>     Just looking at those specs, I cannot say if the gearbox is
>     sequential shift. If it is a motorbike engine then it will be a
>     sequential shift, as it is operated by the drivers left foot.
>     If the engine is not sequential shift, then you cannot adjust it
>     afterwards. You would want to choose the engine and gearbox the
>     way you want it in the beginning.
>
>     Best of luck,
>     -steve
>
>
>     On 02/01/2013 09:08, Anbu wrote:
>>     i am going to use yamaha crux engine with foll specifications IN
>>     MY gokart..
>>
>>     *Power:* 	7.60 HP (5.5 kW)) @ 7500 RPM
>>     *Compression:* 	9.5:1
>>     *Bore x stroke:* 	54.0 x 54.0 mm (2.1 x 2.1 inches)
>>     *Fuel control:* 	SOHC
>>     *Ignition:* 	CDI
>>     *Lubrication system:* 	Wet sump
>>     *Cooling system:* 	Air
>>     *Gearbox:* 	4-speed
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>     IS IT POSSIBLE TO INCLUDE SEQUENTIAL SHIFT IN MY SYSTEM???
>
>
>
>
> -- 
> Regards,
> Anbu 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.burkesys.com/pipermail/kartbuilding/attachments/20130128/d7dc98bb/attachment.html>